User's Manual

The window allows you to set to 64bit or 128bit

Encryption (WEP) by using either Passphrase or

Manual Entry methods.

Note: To allow Decryption and communication, all

wireless devices must share the identical encryption

key on the same network.

Default WEP key to use Select one of the four keys to encrypt your data. Only

the key you select it in the “Default WEP key to use”

will take effect.

Deny unencrypted data To access this wireless network clients are required to

use encryption. This should be checked together with

the item “Enable WEP”.

Authentication

The authentication mode defines configuration

options for the sharing of wireless networks to verify

identity and access privileges of roaming wireless

network cards. You may choose between Open,

Shared Authentication, and Both.

If the Access Point is using "Open Authentication”,

then the wireless adapter will need to be set to the

same authentication mode.

Shared Authentication is when both the sender and

the recipient share a secret key.

Select Both for the network adapter to select the

Authentication mode automatically depending on the

Access Point Authentication mode.

WEP key lengths Select between 64-bit and 128-bit.

WEP key Enter WEP key here .