User's Manual

Getting Connected

1. Find a Location: choose a location to place the Access Point. Usually, the

best place for the Access Point is at the center of your wireless network,

with line of straight to all your wireless stations.

2. Adjust the Antenna: usually the higher the antenna is placed, the better

will be the performance.

3. Connect to your local area network: connect a straight or a crossover

Ethernet cable to one of the Ethernet port of the Access Point, and the

other end to a hub or switch. (If you are using a straight Ethernet cable,

make sure the II-X button is switched right; the other way for Cross

Ethernet cable.)

4. Power on the device: connect the included AC power adapter to the

Access Point’s power port and the other end to a wall outlet. Note: use only

the power adapter that provided with the Access Point. Using a different

power adapter may cause permanent damage to the device.