User's Manual

Installation

2. Connect LAN Cables

Use standard LAN cables to connect PCs to the Switching Hub ports on the Wireless

Router. Both 10BaseT and 100BaseT connections can be used simultaneously.

3. Connect WAN Cable

Connect the DSL or Cable modem to the WAN port on the Wireless Router. Use the cable

supplied with your DSL/Cable modem. If no cable was supplied, use a standard cable.

4. Power Up

• Power on the Cable or DSL modem.

• Connect the supplied power adapter to the Wireless Router and power up.

Use only the power adapter provided. Using a different one may cause hardware damage

5. Check the LEDs

• The Power LED should be ON.

• The Internet LED should be ON.

• The WLAN LED should be ON

• For each LAN (PC) connection, the LAN LED should be ON (provided the PC is also

ON.)

For more information, refer to the Front Panel section in Chapter 1.