User's Manual

5—Wait for devices to connect
90 seconds
The devices connect (pair) after 90 seconds.
6—Using with your mobile phone
The
Bluetooth Stereo Receiver can be used
with a Bluetooth enabled mobile phone.
To pair with your phone
1. Enable Bluetooth on your phone (refer to
the phone’s user manual).
2. Turn on the Stereo Receiver.
3. In the phone’s Bluetooth menu, search for
devices.
4. Select
Stereo Receiver
.
5. Enter the PIN code “0000”.
Answering calls
To
answer a call
, push the play button.
To
end a call
, push the power button.
7—Troubleshooting
8—Specifi cations
Serial number & Firmware version:
Standards
Bluetooth specifi cation V1.2 compliant.
Bluetooth A2DP profi le (AV Profi le)
Bluetooth AVRCP profi le
Headset and Hand free
Tx Power
0.25 ~ 2.5mW (Bluetooth Power Class II)
Rx Sensitivity
< -80dBm (BER 0.1%)
Distance
> 10m (open space)
Audio Streaming Format
SBC 48.000 kHz
Audio Frequency Range
20Hz ~ 22 kHz
Audio S/N
> 85dB
Audio THD
< -83dB
Audio Output Power
> 20mWrms
Power supply
Supply by integrated rechargeable battery cell. Music plays : > 8 hrs.
Physical Specifi cation:
Dimension: 65.5 mm x 35 mm x 22.5 mm
Environmental Range:
Operating temperature:-10 ~ +50 degrees centigrade
Humidity: Relative humidity 0 ~ 95%
If the Bluetooth Stereo Receiver does not
work, try the following:
- Ensure connecting devices are charged
- Turn off all devices and then turn them on
in the order shown in this guide
- Ensure devices are within the 10-meter
range
?