Installation Guide

- 12 -
HARDWARE INSTALLATION
Note: The hardware installation should be only performed when the software is well installed.
For PDA
Insert the CF card into the CE-based PDA by aligning the CF card with wide connection toward the
CF slot.
For Notebook PC
1. Plug the CF card into the PCMCIA Adapter. The CF card is then turning into a conventional
PCMCIA type II PC Card.
2. Align the PC Card toward the PC Card slot with brand label facing upward, as shown below.
3. As soon as the device is properly plugged to your computer, Windows will automatically detect
the device and prompt the following message. Select “Install the software automatically
(Recommended)” And press Next to continue. Select “Continue Anyway” with the following
message.
1. Press Finish to complete the hardware installation.