Installation Guide

- 27 -
Hardware
The Hardware tab of the Bluetooth Configuration Panel provides basic information about the
Bluetooth hardware installed on this computer and access to the Advanced Settings dialog box.
Devices:
Name
name of the device, e.g., My Bluetooth Device
Type
type of the device, e.g., USB.
Device Properties:
Manufacturer
the name of the company that manufactured the device selected in the
Devices section of this dialog box.
Firmware
Revision
the manufacturer's firmware version number.
Device Status
indicates that the device is operating properly or that there is a
problem/conflict.
Device Address
the Bluetooth Device Address (BDA or BD_Addr)
p
rogrammed into this
device when it was manufactured.
HCI Version
the version number of the Bluetooth Specification that the Host Controller
Interface complies with.
HCI Revision
the revision number of the Bluetooth Specification that the Host Controller
Interface complies with.
LMP Version
the version number of the Bluetooth Specification that the Link Manager
Protocol complies with.
LMP Sub
Version
the sub-version number of the Bluetooth Specification that the Link
Manager Protocol complies with.
Advanced displays the Advanced Settings dialog box, which allows you to select the country
code and transmission power settings. This option is not available on all systems
.
Hardware Advanced Settings Dialog Box
When available, this dialog box is reached from the Hardware tab of the Bluetooth Configuration
Panel.
Depending on the country in which the hardware is sold and/or in which it will be used, the
Advanced button may not be present.
From this dialog box you can set the:
Country Code:
N
orth America, Euro
p
e
(
exce
p
t France
)
, and