User's Manual

- 11 -

IP setting:

z Mode:

ET-UW100 provide three modes for user choice. STATIC / DHCP / Auto IP.

z IP address: User could manual key-in the IP address.

z Net mask: User could manual key-in the Net mask address.

z Gateway: User could manual key-in the Gateway address.

z MAC address: It is factory default value. Un-changeable.

z Master DNS: User could manual key-in the Master DNS address.

z Slave DNS: User could manual key-in the Slave DNS address.

z Current IP: It is factory default value. Un-changeable.

z Auto IP Probe Count: User could manual key-in the value for Auto IP mode.

z Auto IP Announce Count: User could manual key-in the value for Auto IP mode.

z Auto IP Packet Interval: User could manual key-in the value for Auto IP mode.

Wireless setting:

z Network Type:

ET-UW100 provide two modes for user choice.

Infrastructure / AdHoc.

z Authentication:

ET-UW100 provide four modes for user choice.

OPEN / Shared / WPAPSK / WPA2PSK.

z Encryption:

ET-UW100 provide four modes for user choice.

NONE / WEP / TKIP / AES.

z SSID: This will base on the AP which

ET-UW100 searching and login.

z Channel: This will base on the AP wireless channel which

ET-UW100 searching and

z Country Region: This is factory default. Un-changeable.

z WEP Key 1~4: User could manual key-in the password under WEP security mode.

z WPAPSK: User could manual key-in the password under WPAPSK security mode.