USER's MANUAL 10/100Mbps Dual Speeds Fast Ethernet PC Card Ethernet Adapter First Edition (Mar, 18, 1880) Document No. M-LE120-1ev1.
Kaboom Systems Inc Ethernet PC Card, Model FE-1200A FCC ID: MO4FE1200A Instruction Manual Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Contents CONTENTS INTRODUCTION! ABOUT THIS MANUAL. SYSTEM REQUIREMENTS... OPERATING ENVIRONMENTS. CONTENTS IN THE PACKAGE... 2.HARDWARE INSTALLATION ...nonrecoverable 2-1 INSERTING THE DUAL SPEEDS FAST ETHERNET PC CARD REMOVING THE DUAL SPEED FAST ETHERNET PC CARD... CONNECTING AND REMOVING THE CABLE OF MEDIA COUPLET TO THE PC CARD . CONNECTING TO THE NETWORK LED Indicator: SOFTWARE INSTALLATION .. MS LAN MANAGER... PACKET DRIVER WINDOWS FOR WORK GROUPS WINDOWS NT 3.51 WINDOWS NT 4.
Contents NOTES FOR WINDOWS FOR WORK GROUPS DRIVER 5. QUESTIONS AND ANSWERS... APPENDIX A. SPECIFICATIONS NETWORK INTERFACE SPECIFICATION: HOST INTERFACE AND PHYSICAL SPECIFICATIONS, OPERATING ENVIRONMENT POWER REQUIREMENTS! GENERAL SPECIFICATION ..
| Introduction ABOUT THIS MANUAL This manual will explain how to install and use your 10/100Mbps dual speeds Fast Ethernet PC Card. The following guideline will help you through the installation process. How to install the Card and Connect it to network -> Chapter 2. Hardware Installation How to install the network driver -» Chapter 3. Software Installation How to do trouble shooting > Chapter 4.
Introduction Microsoft LAN Manager Packet Driver Applications Microsoft Windows for Work groups 3.11 Microsoft Windows 3.1 Microsoft Windows NT 3.51, NT 4.0 Windows 95 Windows 98 Fantastic 6.0 IBM QS/2 Warp Version 3 CONTENTS IN THE PACKAGE Fast Ethernet PC Card Adapter Media couplet with single JR-45 connector for ABASE-T and 100BASE-TX network. 3.
Hardware Installation This chapter describes how to install the dual speeds Fast Ethernet PC Card in your notebook computer and connect it to network. It’s referred to “the PC Card” in this manual. The PC Card could be connected to either 100Mbps Fast Ethernet or 10Mbps Ethernet over shielded twisted pair (UTP) cable. The PC Card have the ability automatic sensing and operating on either speed without manual reconfiguration. Please refer to Chapter.
Hardware Installation Removing the Dual Speed Fast Ethernet PC Card i's quite different for various computer mechanical design. Please refer to the PC Card removal instruction in the document for your notebook computer. Connecting and Removing the Cable of Media Couplet to the PC Card Grasp the PC Card 15-pins connector at the end of the media couplet with the pointing triangle facing upward. Gently insert it into the mating connector on the PC Card until it clicks in place at both sides.
Hardware Installation Attention should be paid when removing the [pins connector. Please press the both sides of the connectors before dragging out of the PC Card. Connecting to the Network Connect shielded twisted pair (UTP) cable to the JR-45 connector of media couplet before loading any network driver, + For operation in the 100Mbps (base's-TX) Ethernet network, a Category 5 shielded twisted pair (UTP) cable should be used to connect between media couplet and 100Mbps hub or switch.
Specifications Power Requirements: # Normal Operation: +5V DC, 250mA max General Specification LED: Link Integrity. Power / Activity, 10/100Mbps Environments Ranges: Operating: 32°F to 49°F (0°C t0 65°C) Storage: °F 10 158°F (08°C 10 70°C) Humidity: 10% 90%. non condensing Certifications: FCC, Part 15, Class B CE Mark (EN55022.
