User's Manual

6. The program displays the following:
-Configure your workstations for backup by a
NetWare server running software such as
BACKUP? (Y/N):
7. Answer accordingly and provide a path if
necessary.
8. Select a driver for your network board.
9. From the driver list, select Other Drivers.
10. Go to the Insert the Driver Disk dialog box
and specify the path where the ODI driver and
INS files reside. For example: C:\ODI.DOS.
11. Press Enter and select the target ODI driver.
12. Specify the driver's optional settings.
13. Press F10 to save to new configuration.
14. Highlight "Install press here" and press
<Enter> to install.
The program copies the necessary files for
NetWare Client. Continue the installation
procedure to completion. Upon completion, a new
NET.CFG file will be created in your DOS
directory. Typically, this file contains the
following lines:
Link Driver CB103
#FRAME Ethernet_802.3
FRAME Ethernet_802.2
- 25 -