User's Manual

QUESTIONS & ANSWERS
This chapter provides a number of examples of
Questions (Q:), Causes (C:), and Answers (A:). If
your LAN is not functioning properly, look up the
problem here, or ask your dealer for technical
assistance.
Q:When I run the DOS real mode driver, it
reports that “CardBus PC Card are not
present”, but I did install the CardBus PC
Card in the slot?
A:Currently, there are no PC Card/Socket Service
which supports CardBus socket in the DOS
mode. We already built the direct enabler into
each DOS mode drivers to active the CardBus
PC Card. Following check list could help you
identify the problem.
1. If you install some other DOS mode
Card/Socket Service from AMI, Award,
Phoenix or SystemSoft…etc, please disable
them by comment out these drivers in the
CONFIG.SYS file.
2. If memory management software e.g.
EMM386 has been installed, you have to
reserve some area in upper memory (C000:0
-- EFFF:F) for attribute memory of PCMCIA
card during enabling the card. Example:
Device=C:\DOS\EMM386.EXE RAM
X=D000-D3FF. Reserve D000 - D3FF for
attribute memory.
- 27 -