User's Manual

Q:When I run the DOS real mode driver, it
reports that “PCI-to-CardBus bridge are not
present”, but my notebook is equipped with
the CardBus socket?
A:Some notebook computer, for example,
Toshiba, needs to enable the System’s BIOS
setting to support CardBus environment. Pleae
check your user manual to find the detail
information.
Q:How come I see the message “UnKnown
PCI-to-CardBus bridge” when I try to load
the driver in DOS mode?
A:The CardBus controller is rolling out from time
to time. The driver set of CardBus 10/100M
Ethernet PC Card support all the CardBus
controllers on the current market. We will
continue to revise our driver to support any new
CardBus controller come to the market. If you
encounter this message, please contact your
local dealer to get the newest driver set. If you
still have problem with it, please contact us to
further support.
Q:The ODI driver is run successfully but fail to
login to the Netware server
C:Frame type incompatible with server or
Interrupt miss match.
- 28 -