User Manual

- 15 -
B. Active Sync via a DB-9 RS-232 cable (two female connectors at
both ends).
Step 1. Cable Connection:
I.
Start→Settings→ Control Panel→PC Connection, click
“Change …” bottom, select “connect to desktop computer using”
to “Com Sync” and press “OK”.
i. Plug one end to the RS-232 Connector (
⎥Ο⎥Ο⎥) at the right
side of the Tablet.
ii. Plug the other end to the RS-232 port in your PC/Laptop.
Step 2. PC setup:
Prerequisite: To make the connection, you will need to install the
ActiveSync 3.71 (or higher) software to your PC/Laptop. To
download this freeware, go to:
http://www.microsoft.com/downloads
to search and download “ActiveSync” to install.
On your PC/Laptop
i. Make sure Microsoft ActiveSync is well installed in your
PC/Laptop.
ii. Open Microsoft ActiveSync.
iii. Select File Get Connected. Both your PC/Laptop and the
Tablet will detect the connection and launch the counterpart
software to make the connection.