~ Kaboom PCI 1M Cellphone Network Adapter Quick installation Guide HP2000 INTRODUCTIONS The PCI 1M Phone Line Network Adapter enables the instant connectivity to multiple PCs over a home's existing telephone lines. ‘You can shares network-enabled-printers, transfer files between computers, play network games, and Moreno switches, hubs, or even any additional cables is needed. The network runs on standard home-grade telephone wires just like the ones you use everyday.
HARDWARE INSTALLATION Before you begin, make sure you turn off all power to your computer. 1. Remove the chassis cover of your computer. 2. Align the contact edge of the PCI 1M Phone line Network Adapter toward the connector of any free PCI Bus Master expansion slot. Push firmly and slowly until it is fully seated in the connector. 3. Screw the PCI 1M Phone line Network Adapter to the computer chassis with the provided screws. 4. Replace the computer's chassis cover. 5. Turn on your computer.
REGULATORY STATEMENTS Part, Class B This device complies with Part 15 of FCC rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interface, and 2. This device must accept any interface received, including interface that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
3. The telephone company may make changes in it's facilities, equipment, operation and procedures; if such changes affect the compatibility or use of this device, the telephone company is required to give adequate notice of the situation with the FCC. 4. If the telephone company requests information on what equipment is connected to their lines, inform them of: a. The telephone number to which this unit is connected. b. The Ringer Equivalence Number (RENT. ¢. The SOC jack required. d.
