USER MANUAL PCMCIA 16/100 FAST ETHERNET & 56K V.90 Demode MULTI FUNCTION PC Card First Edition (September, | 998) Document No. M-LFS60-rev1.
FCC REGULATORY STATEMENTS FCC Certification 10-100 Fast Ethernet + 56K Demurral PC Card POC 3 MOALFS60TX Made in Tasman The United States Federal Communication Commission (FCC) and the Canadian Department of Communications have established certain tales governing ihe use of modems and other electronic equipment FCC Part 68 Registration This high spic 16/100 Fast Buffet ~ 56K BEMOAN Pe Card complies with FOC Part 68 rules.
elms (0) and 0) awe indicated on the libel {he Ringer hays dine Number (TENS is used to determine how mam devices ein be cemented to visa telephone fine, In most areas the stm of the TEN'S of all the devices an any ane line should no exceed S01 foo nia swe attached. they ray wot sing properly dive FCC Part 15 Registration [his device complies with Part 15 of FOU aides.
termination point In the event of problem. you should contact Your equipment sappier in the first instance the device bs designed to work with the notified nem irks in alt EC member states. Nevertheless, some of the network services in industrial countries might not be supported. bal they will net affect the notional data and tax applications. For example the metering charge service in Germany Besides you may encounter difficulty oF musing PULSE dialing function in some of the curs, sate 1 Nordic counties.
[ABLE OF CONTENTS 1. INTRODUCTION 11 ABOUT THIS MANUAL 1.2 ABOUT THIS PRODUCT SPECIFICATIONS 1.22 FEATURES 1.3 SYSTEM REQUIREMENTS 1.4 CONTENTS INCLUDED IN THE PACKAGE 2. INSTALLATION 2 INSTALL LING THE PCMCIA CARD 2 "HE SOFTWARE 221 OVE Ne ARI 22.2 MICROSOFT LAN MANAGER 22.3 PACKET DRIVER 224 WINDOWS FOR WORK GROUPS 3.31 2.2.3 WINDOWS NT 3.51 & 4.0 72.6 WINDOWS 95. WINDOWS ug 2.2.7 ARTISTIC FANTASTIC 6.0 3. GENERAL INFORMATION I NOTES FOR DIS DRIVER 'ES FOR PACKET DRIVER ES FOR WINDOWS FOR WORK GROUP 4.
1. INTRODUCTION Ll. ABOUT THIS MANUAL This manual will explain how to install ang use your multi function 10/100 Fast Theme + 56K Fax/Modem PC Card 12.
receive faxes with any Group 3 fax machine Using standard phone lines and 10/100 Fast Ethernet, the data communication functions of the (0:100 Fast Ethernet + 56K Fax/Modem PC Card will enable you to successfully access to the servers on 10/100 Fast Ethernet LAN and hook up to the Internet, transmit E-Mail. send and receive information and communicate with other PCs, Bulletin Board Services (BBS) or on-line computer networks such as CompuServe and America On line 1.2.1.
5 data compression und ibis 42, MNP Ct Tor correction. AT command set. Fax Group 3, V.17 14400bps, V.2¢ 9600bps Fax Service Class | compliant. Modem COM Port COM, COM, COM V IRQ 15 1/0 Address 220, 300, 320, 340 Features 1. Compatible with most notebook computers amid PCMCIA Card and Socket Service drivers, 2. High degree of reliability letting you out of ruble. 3. Easy to install and play, 4. Support most of the popular Network Operating Systems. 5. Include popular S6K Masquerader communication programs.
* TINT tack for connecting to a phone ph ® RIS Suck for 10/100Tx connectivity to your network resources * Driver software loaded on your PC * Data and’or fax communications software. 14.
2. INSTALLATION This chapter describes how 10 install your 10/100 Fast Ethernet + 56K Fax/Modem multi function PC Card. Installation procedures also cover many popular Network Operating Systems. 2.1. HARDWARE INSTALLATION 1 ro Hold the card label up and insert the card into the computer's PCMCIA slot with the 68 pin connector facing the computer Plug the two 15-pins PC Card connector into the wa 15-pins socket on the PC Card. Now the hardware installation is completed. The PC Card is powered d..
Notebook Press here to release #7 analog Duodenum La Green Link Integrity: On Receives. Ink Green Activity.
22. INSTALLING THE SOFTWARE For Non-Windows 9598 & No-Windews NT System Plug the driver diskette into the floppy drive and set the current drive to the floppy drive (A), 1 INSTALL to install the driver. TIGHTER PEE AN His gas ofe [ees [rev 22.1. Nov ell Wetware Installation Follow the steps bellow to complete the Nov ell Wetware installations i-Run installation program INSTALLMENT in the driver disk (for example, INSTALLMENT. 2. Sclect Wetware 3.x and d.x Workstation in the installation program dialog box.
Installation program starts installing drivers and modifying AUTOCRATIC and NETTING. Select Yes then press Enter to modify the files. 6. Now, the installation is completed. 7. Restart your computer to make Wetware connections. To install the ODI driver manually, follow the instructions below: 1.Copy the file WWETWARE\LMODLCOM NETWAREWNET.CFG and the file from the driver disk to your local hard disk. 2.Using text editor to edit the NETTING for setting the frame type.
3.Using following format to create a startup batch file LSL Link Support Layer Module ‘provided by Novel MOODILY Hardware Specific Module IPOD JINX Protocol Stack Module ‘provided by Nov ell Next Shell Support Module provided by Nov ell LOGIN 2.22. MILAN Manager Installation 1.Cast a look af the REAMED TXT in the \INDIES directory in 10/100 Fast Ethernet + 56K Demode multi function PC Card driver disk.
8.Reboot the computer to load driver and start LAN Manager. Example of PROTOCOL INI [PROTEAN} DRIVER NAME = PROTOZOANS DYNAMIC = YES PRIORITY = NEUTRON] [NETBEUI_XIF] Driver name = nether SESSIONS = 6 LANA BASE =0 {LMNDIS_NIF} + protocol session for multi function LAN/MODEM driver, TO ADDRESS = 0x320 INTERRUPT = 1] DRIVER NAME = BLONDISH 2.2.3. Packet Driver Installation 1.Run INSTALLMENT file in the driver diskette (UNINSTALL. let Packet Driver from the menu screen 3.Check the card settings.
S.Installation program start installing drivers and modifying AUTO EXEC BAT. Select Yes then press Enter to modify the files, 6.Now, the installation is completed, 7.Reboot the computer to load driver 224. Windows for Work groups 3.11 Installation I. Run INSTALLMENT in root directory of 10/100 Fast Ethernet + 36K Fax/Modem PC Card driver disk. 2. Select Windows for Work group in Network Operating System screen 3. Hf current settings are accepted, select Start Installation and go 10 step 13.
and No Additional Network back the Network Settings screen. Click Drivers... button 10 select network driver From Network Drivers dialog box. press Add Adapter... button to enter Add Network Adapter dialog box. Select Unlisted or Updated Network Adapter and press OK. + Windows will prompt a Install Driver dialog box: put the driver diskette into sloppy drive then press OK. Select Enhanced mode INDIES then press OK.
Control Panel > Devices «Select PCMCIA Press STARTUP Select BOOT, then press OK When all PCMCIA adapters are added, press Close and restart Windows Check Event Viewer when system reboots. Ask your laptop dealer for help if any problems occur during the per-installation 10/100 Fast Ethernet + 56K Fax/Modem PC Card Installation in NT 3.51 L Insert the 10/100 Fast Ethernet 56K Fax/Modem multi function PC Card into one of the PCMCIA slots 2. Run Windows NT 3. Login with a full access level ic. ADMINISTRATOR 4.
14. Give appropriate to the 10/100 Fast Theme + 36K Fax Modem PC Card. the settings must be unique for this device, Resources Recommendation FO Base 1/0300. Possible alternative: 0, 340 interrupt If your laptop is equipped (RQ) with multimedia devices, a higher interrupt (IRAQI 1) may be needed. Base Memory | D00O. Possible alternative: DUG COM Part COM to COMA. Select one of the COM port that is not in use by other communication devices 15.
— Remove all existing PC Cards from the system, . Run Windows NT 4.0 Login with a full access level i.c. ADMINISTRATOR Remove all existing network support from MY COMPUTER = CONTROL PANEL =» NETWORK > ADAPTERS Press CLOSE after all network components are removed, Remove all serial port devices in MY COMPUTER -» CONTROL PANEL => PORTS Press CLOSE after all serial port devices are removed.
Windows NT 4.0 wil] grant configurations tor TCP/IP Link [PX/SPX -Beeline These configurations are unique for each network. If vou want to change them, ask your network administrator for help. Press Next twice to use default NETWORK SERVICES settings ter the correct path for NT 4.0 system source files. A dialog box will pop up. Give appropriate system resources to the 10/100 Fast Ethernet + 56K Fax’Modem PC Card: the settings must be unique for this device. Refer to sources Recommendation” for NT 3.
+ Press OK when all setting are completed. + Press CLOSE to complete NETWORK setting, + Reboot Windows NT Modem configuration for NT 4.0 1. Open MY COMPUTER > CONTROL PANEL = MODEMS 2. Using default settings and press NEXT 3. System should have detected your LAN modem PC Card, and enter the Coder Manufactures & Models list screen. 4. Press FINISH and then CLOSE to complete modem setting 5. Reboot the system, 6. The installations for both LAN and Modem are completed. 2.2.6.
ner the correct path, ie. 2”. then insert 10/100 ast Ethernet + 56K Demimonde PC Card driver disk. The driver will be installed automatically, and system may ask for the Windows 95/98 installation Disks to update the existing files or drivers, After the update, system will reboot automatically, 4.For the first time installation, click Network icon in Control Panel to correctly add Protocols, Client and Service according to our application requirements. 5.Reboot the machine and the card will fully function.
AI current settings are correct, select Start Installation and go to step 6. Otherwise, select Modify Parameters to make changes. S.Move cursor to each field you want to make modification and press Infer to set correct value, Then press Enter on the OK. 6. Installation program starts copying drivers and modifying CON FIG SYS, PROTOCOL, and START NET BAT. 7 Reboot the computer to have the driver take effect.
3. MODEM BASICS This chapter covers the basic commands and techniques involved in modem operation. In many this is the only information you will need in order to get your 10/100 Fast Ethernet + 56K Fax/Modem PC Card up and running with communication software, and to start making connections with your PC Card 3.1 Understanding AT Commands The 10/100 Fast Ethernet + 56K Fax/Modem PC Card communicates asynchronously with computers using AT commands.
d by our computer are transmitted to the remote modem rather than being interpreted by the PC Card as commands Using the Windows 95/98 Hyper Terminal Program To issue an AT command statement, you first need to un a communication program such as the Microsoft Windows pyre Terminal” program.
TE — Flow Control; Hardware Click K” when finished. After you have done this, Save your new connection by select ng ave” from the ile” menu then lick ~ K A new connection icon will be added to Your Hyper Terminal folder You are now ready to start entering AT commands, In the terminal window, type: AT LAN modem responds K This confirms that the modem; and your computer are communicating correctly. To test the telephone line connection, issue the manual answer command.
Touch Tone Dialing ATTEND ATOP 3. Tone and Pulse Dialing: ATOP Pausing During Dialing: ATTEND Pulse Dialing; Auto-Answer and Hook Controls Enabling Auto-Answer: ATS@=n 2 21 51212 WT 24 5551212 Note: In this example. » is 2 number from | to 235 that corresponds to the number of rings after which your modem answers an incoming call.
4. DRIVERS INFORMATION 4.1. Notes for DIS Driver The following are examples of CONFIGURATIONS file and AUTOCRATIC for loading System Soft Card Services and INDIES driver: ran dos humanitarian dos indiscretion dos device=e adman divisive Examples of partial AUTO EXEC BAT file: set path= vigilantism. dos netprog:dpath®s aet stein workstation oad netbook The 10/100 Fast Ethernet function configuration information for the DOS DIS driver is contained in the PROTOCOL file.
(DISMAL_ NIE] DRIVER NAME GLISSANDI This Tine must away s be resend value where value is one of the follow address: The indicating Ox is required. To have Card Services select the address base firm its pool of available address then use a value of 0. INTERRUPT value where valets Is one of the following interrupts: 345.7900. 10.12. 4s Te have Card Services an available interrupt resource then place @ valve of 0 at this location. 4.2.
437 N tes for Windows For Work groups After installation of the multi-function PCMCIA card drivers, the system will automatically update both CONFIGURATIONS and AUTOCRATIC for YOu so that the driver will be loaded upon system start up, When modifying the two files, the system will make copies named CONFIGURATION and AUTOMOBILE in the system's directory. If the driver of PC Card is not successfully loaded. replace the two * ABO file for related file and uy to start the system again.
5. QUESTIONS A? ANSWERS This chapter provides a number of examples of Questions Causes (C2), and Answers {A}. If your modem is not functioning properly. look up the problem here. or ask your dealer for technical assistance Q:The modem does not respond to AT commands, C:The COM: port that the modem is set to may be used by another card iy the computer already. A:Change the COM: port of the PC CARD 56K FAX/MODEM modem 10 a different unused port.
ware is set to the same Com: C Make yi Ie port as the modem is. Q:The modem does not give a response after an AT command was executed, C:The echo and/or responses may be turned off by the OPIATE commands. Use AT&Y to check that. ‘Use ANTIQUATE then Enter to change them back Make sure the modem is in Command Mode not in Data Mode when you type the AT command.
Q:The software does not control the modem properly or can aot detect the modem. Ar Make sure the software has been set up correctly, Check the initialization and dial strings C:Some Ts Rs (programs that stay in memory after they are loaded) may conflict with the communications software A Try starting your computer without loading any Ts Rs.
Q:No text appears on the screen when in command mode. Alf you attn see the characters you are typing, then type ATE] then press Enter. Q:The modem does not dial a phone number after You execute the AT dial command, Cif you are using touch tone dialing on a phone line that requires pulses. then it may not work, Use ATTEND in place of ATOP Q:When your communications software tells the modem te dial, it does not. C:Make sure the software dialing prefix is ATTEND.
C:The remote demonize may be waiting for you to type a command, Or wry to press Enter fur logging on to the remote site Q:The modem speaker does not make any sound when you're connecting to another modem.
our telephone ling ma feature. Ary adding "70." to your ATTEND dialing command line. If doesn't help. ask your telephone company how to disable it temporarily. IS Q:The modem gets errors in transmitted data randomly, A Try to use V.42 or MN PI-4 if possible. A:Connect the modems at a slower baud rate. Q: After you download a file, it was not stored on your disk drive. Cif both modems are using MNP or v.
your software to match this slower speed. To return the modem 10 the hig disconnect the link and refer speed, Josh again Q:When using V.42bis or MAPS, some features are disabled. C:You may be using a non-streaming protocol, like Modem or Modem to transfer files. Those are fine unless you are using V ibis or MAPS A:When using V ibis or MNP. you should use a streaming transfer protocol like Modem-G or Modem.
in upper memory —for attribute memory of PCMCIA card during enabling the card. Example: Deviousness EMM386.EXE RAM Reserve DUO DIFF for attribute memory C:No free 1/0 space or interrupt request can be assigned to the PCMCIA card, A:The LAN/Modem card needs 32 contiguous 1/0 ports and one interrupt request for LAN. 1 also need 8 contiguous I/O ports and another interrupt request for S6K Moderateness, The LAN ports have to be located at one of the following 1/0 space. 0x300, 0x320. 05340. 0x360.
Q: How fo install the Win 95 driver over System Soft Card Works ? Atl Start the Win 93 then plug the LAN Modem card into the PCMCIA slot. The System Soft Card wizard window should appear. 2.Select the appropriate slot number which the LAN/Modem card is plugged in. 3.Select View pull down menu 4.Select Properties 5.Select Drivers in Properties, 6.Select Change Card Driver to active the selective items above it 7. Sclect Use Plug and Play. 8.Press OK. Win 95 will request to withdraw the card. 9.
6. APPENDIX A: INDIES AND ODI DRIVERS FOR WFW 3.11 INDIES Driver for Work groups [Run Windows for Work opus and click Network Setup icon in Network group. 2in Network Settings dialog box, click Networks... button to select the network aerating system 3.In Networks dialog bos. check the radio button before [stall Microsoft Windows Network and No Additional Network. Press OK 10 2o back the Network Settings screen. 4.Click Drivers... button to select network driver. 5.n Network Drivers dialog box.
FLIP current settings ure unacceptable. select Start Installation and go to step 13. Otherwise, select Modify Parameters 10 make settings changed. 12. Mace cursor to the setting you want to make a change for then press Enter to select a fir value. When the configuration is set completely, press Enter on the OK field to exit the screen then go back to step 11. 13. Sclect DIS Server{LAN Manager...) as the network server that you will attach to then press Enter key. I4.
6.Windows will prompt a Install Driver dialog box In this time. put the driver diskette into floppy drive then press OK. 7.Select the Wetware ODI Driver string then press OK. 8.Follow Windows’ instructions to complete the installation and exit Windows, 9. Run INSTALL EXE from root directory of driver dieresis. 10.Select Windows for Work group in Network Operating System screen LIF current settings are accepted, select Start Installation and go to step 13.
7. APPENDIX B: INSTALLATION THE 10/100 FAST ETHERNET + FAX MODEM IN WIN 95/98 When vou face the installation problems of LANKAN Fax/Modem PC Card. you need to uninstall the PC Card and install it once again. This installation guide is used to conduct the users to fully uninstall the LANKAN Fax/Modem properties in Windows 95/98. 1. Remove the Multi-function adapters properties from the Device Manager folder of System in Control Panel program group.
[Davids System automation and charges advance 7 20% | Hater Proteus | Competence © View devices by lope. © ima devise by cantonment EET AB Copy {2 5 Fans dais cornet 2% Hard oi corridors 3 Stead 2B Modern 5 florescent LMYSMucier) Cant Maritza © 1 ose EF Confucianism adapter: “ ~ M3 Menelik adulterer: 3 vial Click Start button in Windows 95/98 main screen then select Rut. Insert the 10-100 Fast Ethernet + 36K Fax/Modem Program (Driver) Disk, then enter Zinfandel then click on OK.
COLA La Surat LUN INFORMATION [0 [HE USER RENEGE EEE EG IRE RR ERK KKK This device compiles with pact LJ of the FCC Rules Evaluation feet to the following twa conditions: TL) This May nol cause harmful interference, acd (2) This { MUSE Accept any interference received, including interference that may cause undesired operation. MOTE: This equipment has been tested and found to comply with the limits tor a Class B digital device, Pursuant to Part 15 of the FCC Rules.
