User's Manual

12
L2TP Mode
Server
Information
Select IP address or URL address form the pull-down menu.
L2TP Server IP
Address
Enter the L2TP Server IP Address in this column.
L2TP Server
URL Address
Enter the L2TP Server URL Address in this column.
User Name
Maximum input is 20 alphanumeric characters (case sensitive).
Password
Maximum input is 20 alphanumeric characters (case sensitive).
MTU (Maximum
Transmission
Unit)
Click the pull-down menu to select the most appropriate MTU
(Maximum Transmission Unit, namely the maximum packet size,
the default value is 1400) for your application. Reducing the packet
size can help connecting to certain web sites or speeding up packet
transfer rate. If the incorrect selection is entered, you may not be
able to open certain web sites.
Authentication
Type
Select PAP, CHAP, MSCHAP-v1, MSCHAP-v2 or Auto form the
pull-down menu.
MPPE
Encryption Level
When the authentication type has been set to be MSCHAP-v1,
MSCHAP-v2 or Auto, here can select None, 40 bits, 56bits, 128bits
or Auto form the pull-down menu.
L2TP IP
Address Mode
Select Dynamic or Static for the pull-down menu.
Physical IP
Address Mode
Select Dynamic or Static for the pull-down menu.
DNS mode
Select from the pull-down menu for Static or Dynamic DNS mode.
Clone PC’s MAC
Address
Check to enable this function.