User's Manual

13
Clone MAC
Address
Your ISP may require a particular MAC address in order for you to
connect to the Internet. This MAC address is the PC’s MAC address
that your ISP had originally connected your Internet connection to.
Type in this Clone MAC address in this section to replace the WAN
MAC address with the MAC address of that PC.
Clone IP Address
Shows the IP address of the device from the pull-down menu.
Apply
Click to save and apply the current settings.
Cancel
Click to discard the current settings.
PPTP Mode
Server
Information
Select IP address or URL address form the pull-down menu.
PPTP Server IP
Address
Enter the PPTP Server IP Address in this column.
PPTP Server
URL Address
Enter the PPTP Server URL Address in this column.
User Name
Maximum input is 20 alphanumeric characters (case sensitive).
Password
Maximum input is 20 alphanumeric characters (case sensitive).
MTU (Maximum
Transmission
Unit)
Click the pull-down menu to select the most appropriate MTU
(Maximum Transmission Unit, namely the maximum packet size,
the default value is 1400) for your application. Reducing the packet
size can help connecting to certain web sites or speeding up packet
transfer rate. If the incorrect selection is entered, you may not be
able to open certain web sites.
Authentication
Type
Select PAP, CHAP, MSCHAP-v1, MSCHAP-v2 or Auto form the
pull-down menu.
MPPE
Encryption Level
When the authentication type has been set to be MSCHAP-v1,
MSCHAP-v2 or Auto, here can select None, 40 bits, 56bits, 128bits