User's Manual

or Auto form the pull-down menu.

PPTP IP

Address Mode

Select Dynamic or Static for the pull-down menu.

Physical IP

Address Mode

Select Dynamic or Static for the pull-down menu.

DNS mode

Select from the pull-down menu for Static or Dynamic DNS mode.

Clone PC’s MAC

Address

Check to enable this function.

Clone MAC

Address

Your ISP may require a particular MAC address in order for you to

connect to the Internet. This MAC address is the PC’s MAC address

that your ISP had originally connected your Internet connection to.

Type in this Clone MAC address in this section to replace the WAN

MAC address with the MAC address of that PC.

Clone IP Address

Shows the IP address of the device from the pull-down menu.

Apply

Click to save and apply the current settings.

Cancel

Click to discard the current settings.

LAN (Local Area Network) Settings

LAN Interface Setup

IP Address

Shows the IP address of the router.

Subnet Mask

The subnet mask of the router.

DHCP Type

Disable: Select to disable this Router to distribute IP addresses.

Server: Select to enable this Router to distribute IP Addresses

(DHCP Server). And the following field will be activated for you

to enter the starting IP Address.

DHCP Start IP

The starting address of this local IP network address pool.

DHCP End IP

The ending address of this local IP network address pool.