User's Manual

24
Access Control
Basic Settings
Access Control
Select Disable or Enable from the pull-down menu.
Default Policy -- The
packet that don't match
with any rules would be:
Select Accepted or Dropped from the pull-down menu.
Apply
Click to save and apply the current settings.
Reset
Press to discard the current settings.
Access Control Settings
Source IP Address
Enter the client IP address.
Dest IP Address
Enter the destined IP address.
Port Range
For TCP and UDP services enter the beginning of the range
of port numbers used by the service. If the service uses a
single port number, enter it in both the start and finish fields.