User Manual

Bluetooth USB Dongle

Quick Install

This quick Installation is meant to help you install the product quickly and

easily. For detailed instructions on the Bluetooth application, please refer to

the User Guide saved in the included CD.

Insert the included CD-ROM into your computer. The

CD-ROM will run automatically. If the Auto-Run function

is not functioning, please open the installation CD to find

“Setup.exe” file and double-click it to continue.

1. On the Welcome screen, click Next.

The installation program will start running automatically.

Follow the on-screen instruction to proceed.

Click OK at the following message

When the following message appears, proceed to “Install

the Device” and click OK.

Note:

Insert the USB Adapter.

Driver Installation

Install the Device

Plug the USB adapter to a free USB port on your computer.

Once the device has been inserted to your computer,

Windows will detect the new hardware. Windows will

then copy necessary files to your computer.

Click “Finish” to complete the installation.

You will be asked to restart your system for the new

settings to take effect. Click “Yes” to restart immediately

or “No” to restart later manually.

After completing the installation, the Bluetooth icon will appear

on the task bar and the desktop as

well. You can open it by

double-clicking the icon to start

the Bluetooth Configuration.

PAGE 1
Bluetooth USB Dongle Note: This quick Installation is meant to help you install the product quickly and easily. For detailed instructions on the Bluetooth application, please refer to the User Guide saved in the included CD. Driver Installation Insert the included CD-ROM into your computer. The CD-ROM will run automatically. If the Auto-Run function is not functioning, please open the installation CD to find “Setup.exe” file and double-click it to continue. 1.
PAGE 2
Quick Install Bluetooth USB Dongle 5. When the following figure appears, if you want to search for remote Bluetooth devices to connect, click Next; or click Skip to search later. 6. After clicking Next on last step, the following figure will appear, select a device from the list to establish connection, then click Next. 7. Enter the PIN Code if the device you have chosen need one and then click initial pairing; if not, click Skip Pairing. 8.
PAGE 3
Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.