REGULATORY STATEMENTS FCC Certification Partly, Class B The United States Federal Communication Commission (FCC) and the Canadian Department of Communications have established certain rules governing the use of electronic equipment. FCC Part 15 Registration This device complies with Part 15 of FCC rules.
INTRODUCTIONS The USB 10/100M Fast Ethernet Adapter provides outside-the-box plug-and-play local area network connections for USB-enabled PCs, notebooks and laptops. This adapter uses a B type USB port to connect with the USB host, and an JR-45 port to connect with a 10/100 Fast Ethernet LAN link. Installation is easy and no external power is required! The network sharing is easier than ever. Specifications Network standard «= THEE 802.3 for basset = [EEE 802.
Parts Names and Functions @© USB Connection Cable: connects the USB host port to the USB 10/1G0M Fast Ethernet Adapter. @ USB Fast Ethernet Adapter 3 18/160 LED indicator: glows amber when LOOM Network is linked; when it dims, it means the 10M Network is linked. @ Link/Act LED indicator: glows green when it is linked; blinks green when the Fast Ethernet Adapter is transmitting/receiving data. ® Network Port: connects the Fast Ethernet Adapter to the HUB with the LAN cable.
INSTALLATION Precaution Before the installation, make sure the USB port exists in your computer and is enabled, To check this, go tw My Computer colonizer Panel System. Open the Device Manager tab. If the Universal Serial Bus controller device is Sound, it means your USB port is installed and enabled. {f not, either no USE port is installed or the USB bios is not properly enabled.
2.Connect the UTP cable to the Fast Ethernet Adapter. 3. Connect the other end to a Hub. 4. Windows 98 will automatically detect the new hardware device. Perform the following procedures for installing the device driver. Add Hew Hardware Wizard a [Ton] co | 5. Insert the device driver disk into your floppy drive. When the above figure appears, click Next.
6. The installation program will proceed automatically, Follow the on-screen instruction to finish. 7. When Windows prompts you to restart your computer, click No to make some changes to your network settings.
. Go to the Start menu, Point to Settings. Click Control Panel, Double-click Network. 9. When the Network dialog box appears, select USB 10/100 Fast Ethernet and click Add. Set the appropriate protocols and client for you needs. When completed, click OK.
10. Remember to restart your computer to activate the new device Setup Diagnostics You can perform the following strops to check if this USB 10/100M Fast Ethernet Adapter is well installed. 1. Go to Desktop. 2. Right-click My Computer. 3. Click Properties. 4. Open the Device Manager tab. 5. Click the plus sign If the 10/100 USB Network Adapter appears as Illustrated below, it means your 10/100 Fast Ethernet Adapter is well installed.
