REGULATORY STATE, Partly, Class B FOC IDMOIUHLIKA This device complies with Part subject to the following two condition I. This device may not cause harmful interlace. device must accept any Interface re including interface that may cause undesired operation, “This equipment has been tested and found to comply with the limo B digital device, pursuant to Part 13 of the FCC Rules. These Hits are designed to provide reasonable protection against harmful interference in a residential installation.
Features * Connects to a network using our existing telephone Line -No additional hubs or network cables needed » Works with any PC with a USB port « Supports Microsoft Windows 98 «Bps transfer rate over telephone lines * USB cable included — true plug & play + Homepage compliant «Connects up to 25 devices together on your home phone network System Requirements + A Pentium® processor-based personal computer 166MMX or above. * At least 16 MB of RAM. + One USB port well installed and enabled.
Hardware Installation Precaution Before the installation, make sure the USB pore exists in your computer and is enabled. To check this, go to My Open the Device Manager tab. If the Universal Serial Bus controller device is found, it means your USB port is installed and enabled. If not, it means ro USB port is installed or the USB bios is not properly enabled. In this case, consult your computer dealer for USB support. Gin.
SOFTWARE INSTALLATION i. wl Once the USB IM Homepage Adapter is connected to your computer, Windows 98 will automatically detect the new hardware device as shown below. Click Next, nd Mow ica Wood fr vid sea hes br es vies stereo Bsn. dvs dint svn gins ek asks fen drives Insert the device driver diskette into your floppy drive. When Windows prompts you What do you want Windows to do? Select Search for the best driver for your device. (Recommended). Click Next. Follow the on-screen instruction to proceed.
Windows will finish copying all the necessary files to your system. When the following window appears, click Finish. FT iyo han Aden: into hs baa 1 shies 2 sou rs ins discretionary When asked if you want to restart your computer, click No Once you are back at the Windows 98 desktop, click the Start button. Click Settings, then Control Panel. Double-click the Network icon. The Network window will appear.
TENS a x) [BSR can | Beast Bonk] Th Fue ptr computerizes aie insole: [2 Chart 13 Economist Newark USB 110/100 Helios: Dapple 4" HBB! Torah Nina twos Logon Cain fos Mesozoic Hew arks Te Fie a Fi Sharing. Dustin 9K Cancel 9. If you are missing required components, you'll need to install them manually. If you need to install the TCP/IP Protocol, contact your system administrator or refer to the Windows 98 documentation. 10. in the Primary Network Logon box, select Client for Microsoft Networks, (1.
E50 TT Transfiguration | -stiffening. Sauropods Corot | = Control accesses to shared Estes sg: #8) Enables you to supply 2 piston for each shaved cesium. £ Oversell possess canticle © Enables youth specially users aid groups whe Fave SE Sakai fr och shared sis, Celtic 13. When finished, remember to restart your computer to activate the new device. Once the computer has restarted and Windows 98 has booted up, the Link light will be on.
Client Setup if you are not using Windows 98 with an NT or Net Ware file server, skip the next two paragraphs. Perform the following procedures to prepare your computer to be used with any file servers that may be on the network, Connecting to a Net Ware File Server 1, Click My Computer, Control Panel, and Network. wo Change the Network Logon to Client for Net Ware Network. 3. Double-click the Client for Net Ware networks. Put your server's name in the Preferred Server box.
4. Click OK and restart tout PC. Connecting to a Windows NT Domain 1. Click My Computer, Control Panel, and Network. Change the Primary Network Logon to Client for Microsoft Network. 2. Double-click the Client for Microsoft networks. wi Select the Log on to Windows NT domain box. Put your N'T domain name in the Windows NT domain area. 4. Click OK and restart your PC. “Gene rel “Logon oxidative = When you lag on. you oa oi undo NT. did main.
Using File and Printer Sharing 1. Click Start, Settings, Control Panel. Double click Network. 2. Click the Configuration tab. followed by the File and Printer Sharing button. The File and Printer Sharing window will appear. EL] 0 Pliant lots able to give others. activists to my flea. T° Lubricator bie 8b1& 15 allow others to print to wy priciest. Ans] « 1f you'd like others to be able to access the files on your PCs hard drive, select | want to be able to give others access fo wy files.
Enabling File Sharing 1. Double-click My Computer. A window of available disk drives will appear. ~ Right-click once the drive or folder that you want fo make available to other users. 3, Click Sharing. followed by the Sharing tab. Click Share As. [n the Share Name box, enter a name for the drive or folder you are sharing, (eg: C-Drive, CD-ROM, Lila, teeter.
« Read-Only access lets other users view the files on your PC. « Full access lets users create, change, or delete files on your PC, + Depends on Password lets users have Read-Only and/or Full access, depending on the password that vou decide to give them. Use your mouse to select the type of file shaving access that you want other users to have. if you want to assign access password{s), type them into the Password box(es).
