User's Manual

17
2. After confirming the hardware connection, please execute the software
application that installed.
Communication
Select the Com Port that connects the computer with RS232
D-Sub cable to the transceiver.
RF Board Program
(bin file)
1. Find and open the RF firmware file by click the
button, the browser will display to correct file path.
2. Then, select the Product button to upgrade the
program.
3. The upgrade status will show in the column below of
the screen.
4. Wait for “upgrade success” message comes out from
state log area.
5. If get “fail” message from state log area, please re-do
the steps again.
6. After finished the firmware upgrade, please turn off