Draft Version AboCom System, Inc. Product Specification VM310T 60GHz Gen2 Wireless HD TX Module Release 0.3 Date: Sep 18, 2010 Author: Wayne Tseng Reviewer AboCom systems, Inc.
Draft Version Table of Contents 1.0 REVISION HISTORY............................................................................................................................. 3 2.0 RELATED DOCUMENTS....................................................................................................................... 3 3.0 INTRODUCTION.................................................................................................................................. 4 4.0 FEATURES ....................
Draft Version 1.0 Revision History Date Aug. 5, 2010 Sep. 8, 2010 Sep. 18, 2010 Release 0.1 0.2 0.3 Author Sandy Chen Wayne Tseng Wayne Tseng Description Draft version Modification for FCC submission Modification for IC & FCC module submission 2.0 Related Documents Date Author AboCom systems, Inc.
Draft Version 3.0 Introduction For coming huge flat TV Screen and high definition resolution, user like to set up the AV system in living room, but the cable placement always be a great harassment to the interior of beautiful house. Also the HDMI cable is as expensive as the length as be. Users deserve to have a wireless cable replacement to match their high class AV systems. Here shows up a high edge solution to meet users’ equipment: 60GHz wirelessHD Audio‐Video Adapters, VM310T.
Draft Version 1080i 1080p VGA WVGA SVGA XGA SXGA WSXGA+ 50Hz YCbCr 04:02:02 04:04:04 24/30/36‐bits 24/30/36‐bits 59.94/60Hz RGB YCbCr 04:04:04 04:02:02 04:04:04 24/30/36‐bits 24/30/36‐bits 24/30/36‐bits 23.976/24Hz RGB YCbCr 04:04:04 04:02:02 04:04:04 24/30/36‐bits 24/30/36‐bits 24/30/36‐bits 50Hz RGB YCbCr 04:04:04 04:02:02 04:04:04 24/30/36‐bits 24/30/36‐bits 24/30/36‐bits 59.
Draft Version Audio Format Audio up to 8‐ch., 24‐bit 192 kHz LPCM, surround sound audio (6/8‐ch. PCM, Dolby Digital, DTS) Audio Sample Rate, F's Multiples of Fs LPCM 2‐channel LPCM 2/6/8‐channels DTS & Dolby Digita 2/6 channels 128 256 32 kHz 4.096 8.192 44.1 kHz 5.645 11.29 48 kHz 6.144 12.288 88.2 kHz 11.29 22.579 96 kHz 12.288 24.576 176.4 kHz 192 kHz 22.579 24.576 45.158 49.152 Specification subject to change without notice AboCom systems, Inc.
Draft Version 5.0 Specification ‐‐ The column of “Designer Input “is for PM/RD of Product House to fill in, according to its product definition ‐‐ The column of “FCS options” is for PM to fill in, according to marketing requirements ‐‐ The column of “Note” is for adding comments or clarifications on each feature listed ‐‐ Besides specific descriptions, the usable comments for “Designer Input” and “FCS options” are listed as below 1.
Draft Version 5.2 Interface 5.2.1 Control I/O This connector use for manufcture purpose and engineering debug. Connector P/N: DF20G-30DP-1V of Hirose, PVT and MP model will change to P/N MDS24011P15C of STM 5.2.2. Power Connector 4‐pin pitch‐2.0mm connector onVM311R. Pin No.
Draft Version 5.3. LED Behavior 1.0. LED Behavior LED Power/Signal Printed Color Behavior Indication Power Green dark/light Power Off/On Green dark/light none/Pairing Link ※The LED will be flash before TX and RX link 5.4 RF Specifications 1. RF Designs 1.1. Designer Input Antenna Designs Antenna 32 Antenna Array Antenna Type Integrate Ceramic 1.2. LRP Radiated Power(EIRP) Maximum 21dBm (Max) 1.3 LRP Transmite Antenna Gain Maximum 13dBi (Max) 1.
Draft Version 5.
Draft Version 6.
Draft Version Provide later 6.1 Enclosure Specifications Please refer to above page. 6.1.1 Proposed front panel and side configuration: 1 LEDs display : Power/Link 6.1.2 Proposed rear panel configuration: HDMI interface 6.2 Power Requirement Power input DC 5V 2.
Draft Version FCC module Statement: IMPORTANT NOTE: This module is intended for OEM integrator. The OEM integrator is still responsible for the FCC compliance requirement of the end product, which integrates this module. 20cm minimum distance has to be able to be maintained between the antenna and the users for the host this module is integrated into. Under such configuration, the FCC radiation exposure limits set forth for an population/uncontrolled environment can be satisfied.
Draft Version Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.