Draft Version AboCom System, Inc. Product Manual VM311T 60GHz Gen2 WirelessHD Transmitter Module Release 0.4 Date: Nov. 25, 2010 Author: Wayne Tseng Reviewer AboCom systems, Inc.
Draft Version Table of Contents 1.0 REVISION HISTORY............................................................................................................................. 3 2.0 RELATED DOCUMENTS....................................................................................................................... 3 3.0 INTRODUCTION.................................................................................................................................. 4 4.0 FEATURES ....................
Draft Version 1.0 Revision History Date Apr. 22, 2010 Jun. 8,2010 Sep. 18,2010 Nov. 25, 2010 Release 0.1 0.2 0.3 0.4 Author Sandy Chen Wayne Tseng Wayne Tseng Wayne Tseng Description Draft version Modification for FCC submission Modification for IC & FCC module submission Change HRP/LRP antenna gain spec 2.0 Related Documents Date Author AboCom systems, Inc.
Draft Version 3.0 Introduction For coming huge flat TV Screen and high definition resolution, user like to set up the AV system in living room, but the cable placement always be a great harassment to the interior of beautiful house. Also the HDMI cable is as expensive as the length as be. Users deserve to have a wireless cable replacement to match their high class AV systems. Here shows up a high edge solution to meet users’ equipment: 60GHz wirelessHD Audio-Video Adapters, VM311T.
Draft Version 50Hz RGB YCbCr 04:04:04 04:02:02 04:04:04 24/30/36‐bits 24/30/36‐bits 24/30/36‐bits 59.94/60Hz RGB YCbCr 04:04:04 04:02:02 04:04:04 24/30/36‐bits 24/30/36‐bits 24/30/36‐bits 23.976/24Hz RGB YCbCr 04:04:04 04:02:02 04:04:04 24/30/36‐bits 24/30/36‐bits 24/30/36‐bits 50Hz RGB YCbCr 04:04:04 04:02:02 04:04:04 24/30/36‐bits 24‐bits 24‐bits 59.
Draft Version 5.0 Specification ‐‐ The column of “Designer Input “is for PM/RD of Product House to fill in, according to its product definition ‐‐ The column of “FCS options” is for PM to fill in, according to marketing requirements ‐‐ The column of “Note” is for adding comments or clarifications on each feature listed ‐‐ Besides specific descriptions, the usable comments for “Designer Input” and “FCS options” are listed as below 1.
Draft Version 5.2 RF Specifications 1. RF Designs 1.1. Designer Input Antenna Designs Antenna 32 Antenna Array Antenna Type Integrate Ceramic 1.2. LRP Radiated Power(EIRP) Maximum 21dBm (Max) 1.3 LRP Transmite Antenna Gain Maximum 16dBi (Max) 1.4 HRP Radiated Power(EIRP) Maximum 27dBm (Max) 1.
Draft Version 5.3. LED Behavior 1.0. LED Behavior LED Printed Color Behavior Indication Power Green dark/light Power Off/On Link Green ※The LED will be flash before TX and RX link dark/light none/Pairing Power/Signal 5.
Draft Version 6.0 Physical Specifications TBD 6.1 Enclosure Specifications Please refer to above page. 6.1.1 Proposed front panel and side configuration: One LED display 6.1.2 Proposed rear panel configuration: Power Jack, HDMI interface 6.2 Power Supply External Power adapter：Input AC 100 – 240V @60Hz; Output 5V 2A 7.
Draft Version 8.0 Necessary Approvals 8.
Draft Version FCC module Statement: IMPORTANT NOTE: This module is intended for OEM integrator. The OEM integrator is still responsible for the FCC compliance requirement of the end product, which integrates this module. 20cm minimum distance has to be able to be maintained between the antenna and the users for the host this module is integrated into. Under such configuration, the FCC radiation exposure limits set forth for an population/uncontrolled environment can be satisfied.
Draft Version Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
