User Manual

Set WEP key

 Click the Set WEP Keys will prompt you a

window to set 64bit or 128bit Encryption.

 Select HEX if you are using hexadecimal

numbers (0-9, or A-F). Select ASCII if you are

using ASCII characters (case-sensitive).

 Ten hexadecimal digits or five ASCII

characters are needed if 64-bit WEP is used;

26 hexadecimal digits or 13 ASCII characters

are needed if 128-bit WEP is used.

Encryption: WPA (TKIP)

WPA (TKIP): If WPA is selected, users will have to select the Authentication modes

between Enterprise (RADIUS) and Personal (Pre-shared Key).

Pre-shared Key

Pre-Shared-Key serves as a password. Users

may key in a 1 to 63 characters string to set the

assword or leave it blank, in which the 802.1x

Authentication will be activated. Make sure the

same password is used on client's end.

There are two formats for choice to set the Pre-

shared key, i.e. Passphrase and Hex. If Hex is

selected, users will have to enter a 64 characters

strin

. For easier confi

uration, the Pass

hrase