User Manual

23
(at least 8 characters) format is recommended.
Group Key Life Time
Enter the number of seconds that will elapse
before the group key change automatically. The
default is 86400 seconds.
Enable Pre-Authentication
The two most important features beyond WPA to
b
ecome standardized through 802.11i/WPA2 are:
pre-authentication, which enables secure fast
roaming without noticeable signal latency.
Preauthentication provides a way to establish a
PMK security association before a client
associates. The advantage is that the client
reduces the time that it's disconnected to the
network.
Authentication RADIUS Server
Port: Enter the RADIUS Server’s port number
provided by your ISP. The default is 1812.
IP Address: Enter the RADIUS Server’s IP
Address provided by your ISP.
Password: Enter the password that the AP
shares with the RADIUS Server.
Apply Change
Press to save the new settings on the screen.
Reset
Press to discard the data you have entered since last time you
press Apply Change.
Access Control
When Enable Wireless Access Control is checked, only those clients whose wireless
MAC addresses listed in the access control list can access this Access Point. If the list
contains no entries with this function being enabled, then no clients will be able to access
this Access Point.