User Manual

27
TCP/IP
Basic
In this page, you can change the TCP/IP settings of this Access Point, select to
enable/disable the DHCP Client, 802.1d Spanning Tree, and Clone MAC Address.
IP Address
This field can be modified only when DHCP Client is disabled.
If your system manager assigned you static IP settings, then you
will have to enter the information provided.
Subnet Mask
Enter the information provided by your system manager.
Default Gateway
Enter the information provided by your system manager.
DHCP
Select Disable, Client or Server from the pull-down menu.
Disable: Select to disable DHCP server function.
Client: Select to automatically get the LAN port IP address from
ISP (For ADSL/Cable Modem).
Server: Select to enable DHCP server function.
DHCP Client
Range
253 IP addresses continuing from 192.168.1.1 to
192.168.1.253
Show Client
Click to show Active DHCP Client table.
DNS Server
Enter the Domain Name Service IP address.
802.1d
Spanning Tree
To enable 802.1d Spanning Tree will prevent the network
from infinite loops. Infinite loop will happen in the network