Installation Guide

- 37 -
Key1/Key2/
Key3/Key4
This setting is the configuration key
used in accessing the wireless
network via WEP encryption. To
generate an encryption key:
1. Select 64 Bit or 128 Bit.
2. Click "Key1" or "Key2" or
"Key3" or "key4" item, then fill in
the appropriate value/phrase.
Default Key
You can specify up to 4 different
keys to decrypt wireless data.
Select the Default key setting from
the pull-down menu.
Mode
Two WEP modes are available as
below: Mandatory and Optional.
Mandatory:WEP Encryption is
required to establish
connection with other
stations within the
wireless network.
Optional:Your station can
communicate with other
stations within the
wireless network
regardless if they use
WEP or not.
Authentication
Type
The authentication type defines
configuration options for the sharing
of wireless networks to verify
identity and access privileges of
roaming wireless network cards.
You may choose between Open
System, Shared Key, and Auto.
O
p
en S
y
stem: If the Access Point