User's Manual

-
14 -
Identity: Enter the given identity in this column.
Password: Enter the given password in this column.
Use Client Certificate: Check to enable this authentication
function.
Protocol: Select a protocol from the pull-down menu,
including EAP-MSCHAP v2, EAP-MSCHAP v2,
EAP-TLS/Smart card Generic Token Card.
(Tunnel)Identity: Enter the identity for tunnel.
( Tunnel)Password: Enter the password for tunnel.
 CA Server Tab-
It is the Certificate Authority Server, each certificate is
signed or issued by it.
Use certificate chain: Check to enable the certificate
function.
Certificate issuer: Check to enable the certificate issuer
function.
Allow intimidate certificates: It must be in the server
certificate chain between the server certificate and the
server specified in the certificate issuer must be field.
Server name: Enter an authentication sever root.
Delete Select a profile and click Delete to delete it.
Edit Click to edit your existing profiles.
Activate Click to activate your existing profiles.
OK Click to exit this page.