User's Manual

- 28 -
Advanced Tab
Wireless mode Select wireless mode. 802.11b only and 802.11 b/g mixed
mode are supported
Ad hoc wireless mode Select ad hoc wireless mode. 802.11b only and 802.11 b/g
mixed mode are supported.
B/G Protection Choose Auto, On or Off from the pull-down menu.
Auto: STA will dynamically change as AP announcement
On: Always send frame with protection.
Off: Always send frame without protection.
TX Rate Select the Tx rate from the pull-sown menu. The default is
auto.
Tx Burst Check to enable the burst mode.
Enable TCP Window
Size
Check to increase the transmission quality.
Fast Roaming at Check to set the roaming interval.
Select Your Country
Region Code
Select your country region code from the pull-down menu.
CCX2.0: support
Cisco Compatible
Extensions function:
Check to enable the CCX2.0 function.
• LEAP turn on CCKM
• Enable Radio Measurement: Check to enable the Radio
measurement function.
• Non-Serving Measurement: can channel measurement
every 0~2000 milliseconds.
Radio Off/On Click to turn off the radio function.
Apply Click to apply the above settings.
OK Click to exit this page.