User's Manual

- 10 -
Tx Power: Select the Tx Power percentage from the
pull-down menu, including 100%, 75% and 50%
Preamble: A preamble is a signal used in wireless
environment to synchronize the transmitting timing
including Synchronization and Start frame delimiter. Select
from the pull-down menu to change the Preamble type into
Long or Short.
RTS Threshold: The minimum packet length for sending
an RTS frame, in bytes. The value must be greater than 0
(default is 2347)
Fragment Threshold: The maximum fragment length, in
bytes. The value is an even number from 256 to 2346
(default is 2346).
OK: Click to save and exit the current page.
Cancel: Click to exit the current page.
Apply: Click to apply and save the current settings.
 Authentication and Security Tab-
Authentication Type: Select an Authentication Type
from the pull-down menu, including Open, Shared,
LEAP, WPA, WPA-PSK, WPA2 and WPA2-PSK.
• Shared- Shared Key is when both the sender and the
recipient share a secret key.
• Open- If your access point/wireless router is using
"Open " authentication, then the wireless adapter will
need to be set to the same authentication type.
• LEAP- (only with CCX mode enabled)
• WPA-PSK- WPA-PSK offers two encryption methods,
TKIP and
AES
.
Select the type of algorithm,
TKIP
or