Manualshelf

User's Manual

ManualsBrandsAbocom Systems ManualsElectronics802.11n compliant 2.4GHz Mini-PCI Module
11121314151617181920
-
16 -
• PEAP (EAP-GTC)
• PEAP (EAP-MSCHAP V2)
• LEAP
If the access point that the wireless adapter is associating to
has WEP set to Optional and the client has WEP enabled,
make sure that Allow Association to Mixed Cells is checked
on the Security Tab to allow association.
• Pre-Shared Key (Static WEP): Enables the use of pre-shared
keys that are defined on both the access point and the station.
To define pre-shared encryption keys, choose the Pre-Shared
Key and click the Configure button to fill in the Define
Pre-Shared Keys. If the access point that the wireless adapter
is associating to has WEP set to Optional and the client has
WEP enabled, make sure that Allow Association to Mixed
Cells is checked on the Security Tab to allow association.
• None: No security (not recommended).
Allow Association to Mixed Cells: Check this check box if the
access point with which the client adapter is to associate has WEP
set to Optional and WEP is enabled on the client adapter.
Otherwise, the client is unable to establish a connection with the
access point.
Profile Locked: Choose this to active the function.
Limit Time for Finding Domain Controller to: Check this
check box and enter the number of seconds (up to 300) after
which the authentication process times out when trying to find the
domain controller. Entering zero is like unchecking this check
box, which means no time limit is imposed for finding the domain
controller.
Note: The authentication process times out whenever the
authentication timer times out or the time for finding the
domain controller is reached.
Group Policy Delay: Specify how much time elapses before the
Windows logon process starts group policy. Group policy is a
Windows feature used by administrators to specify configuration
options for groups of users. The objective is to delay the start of
Group Policy until wireless network authentication occurs. Valid
ranges are from 0 to 65535 seconds. The value that you set goes
into effect after you reboot your computer with this profile set as
the active profile.