User's Manual

To set the operation mode to Client (Infrastructure), please go to “Wireless

JBasic Settings”, in the “Mode” field click the down arrow b to select Client mode,

and then select “Network Type” as “Infrastructure”.

Client Mode (Ad-hoc)

If set to the Client (Ad-hoc) mode, this device can work like a wireless station when it

is connected to a computer so that the computer can send packets from wired end to

wireless interface. You can share files and printers between wireless stations (PC

and laptop with wireless network adapter installed).

See the sample application below.

To set the operation mode to Client (Ad-hoc), please go to “Wireless JBasic

Settings”, in the “Mode” field click the down arrow b to select Client mode, and

then select Network Type as “Ad-hoc”.