User's Manual

Disabled by default. When WEP is enabled, data packet is

encrypted before being transmitted. The WEP prevents data

packets from being eavesdropped by unrelated people. By

using WEP data encryption, there may be a significant

degradation of the data throughput on the wireless link.

BSSID

BSSID displays the ID of current BSS, which uniquely

identifies each BSS. In AP mode, this value is the MAC

address of this Access Point.

Associated Clients

Displays the total number of clients associated to this AP. You

can have up to 64 clients to associate to this Access Point.

TCP/IP Configuration

Attain IP Protocol

Display the method to get the IP of this AP, which could be

obtained by Fixed-IP or DHCP-client.

IP Address

Current IP address for this Access Point

Subnet Mask

Current Subnet mask for this Access Point

Default Gateway

Default Gateway for this Access Point

MAC Address

The MAC Address for this Access Point

Wireless

Basic Settings

This page includes all primary and major parameters. Any parameter change will cause the

device to reboot for the new settings to take effect.

 Disable Wireless LAN Interface

Check the box to disable the Wireless LAN

Interface, by so doing, you won’t be able to