User's Manual

29
This function enables users to save the current configurations as a file (i.e. config.dat)
To load configuration from a file, enter the file name or click Browse… to find the file
from your computer.
Save Settings to File: Click SAVE.. to save the current configuration to file.
When prompted the upper left screen, select “Save this file to disk”, and the upper right
screen will prompt you a dialog box to enter the file name and the file location.
Load Settings From File: Click Browse… if you want to load a pre-saved file, enter the file
name with the correct path and then click on Upload. Or click Browse… to select the file.
Reset: Click to restore the default configuration.
Password
For secure reason, it is recommended that you set the account to access the web server of this
Access Point. Leaving the user name and password blank will disable the protection. The
login screen prompts immediately once you finish setting the account and password.
Remember your user name and password for you will be asked to enter them every time you
access the web server of this Access Point.