User's Manual

14
IP Address
Default: 192.168.1.254 (this is the local address of this
Router)
Subnet Mask
Default: 255.255.255.0
DHCP
Disable: Select to disable this Router to distribute IP
Addresses (Disabled)
Server: Select to enable this Router to distribute IP Addresses
(DHCP Server). And the following field will be activated for
you to enter the starting IP Address
DHCP Client Range The starting address of this local IP network address pool.
The pool is a piece of continuous IP address segment. Keep
the default value 192.168.1.1 should work for most cases.
• Maximum: 253. Default value 253 should work
for most cases.
Note: If “Continuous IP address poll starts” is set at
192.168.1.1 and the “Number of IP address in pool” is 253,
the device will distribute IP addresses from 192.168.1.1 to
192.168.1.253 to all the computers in the network that request
IP addresses from DHCP server (Router)
Show Client
Click to show Active DHCP Client table.
Save
After completing the settings on this page, click Save to save
the settings.
Reset
Click Reset to restore to default values.