User Manual

7
Setup Wizard
For Windows 2000 & XP users, your computer should obtain an IP Address automatically
from the Wireless Router's DHCP Server, after you've done the above steps and restarted
your computer.
1.Start your WEB browser. In the Address box, enter the following:
HTTP://192.168.1.254
Figure 5
2. Press the Setup Wizard on the upper left screen to configure the router.
Figure 6
3. Refer to the data from your ISP and the following table, please select the type of Internet
Access you want. And then follow the instructions on the screen to continue.
Figure 7
The type of
Internet
Access
Type of
connection Data Required
PPPoE
(DSL dynamic
mode)
PPPoE Please enter “ Login name” and “ Password”.
DHCP
(CATV dy-
namic mode)
DHCP
Usually you don’t need to enter any data, but
some ISP
may require a particular Hostname, Domain name
.
Please enter the data required.
Static configu-
ration
Static IP
For static IP users, please enter the data provided by
your ISP including IP address, Subnet Mask, Gateway,