User Manual

9
Check the Network Connection
After the installation is completed, you can open a new browser to surf the Internet.
If the browser fails to open the web page, you can check the Internet connection by following
the steps below:
1. On the browser’s “address” field, type in 192.168.1.254 and click “Go”.
2. Leave both “User Name” and “Password” blank and press“Ok”.
3. On the screen, select “Network status” tab on the upper right hand screen.
4. Locate “IP address” on the screen.
• If the IP address is not 0.0.0.0 (as illustrated below), the Internet connection is established.
• If the IP address is 0.0.0.0, that means the Internet connection test fails. Please check
your data, the Cable/DSL modem, and all connection. Make sure you have entered all
data correctly. Repeat the Setup Wizard described above.
Figure 9
Network Status
The Internet
connection is
established.