User Manual

Figure 10

Device Information

Adapter Address

This field is grayed out, because the Adapter Address is

not supposed to be entered randomly. Do Not change the

content unless you are sure it is necessary to modify your

MAC address. To modify the address; check Modify

and enter the desired MAC address.

Device/Computer

Name

Enter a descriptive name for identification purpose. Some

Internet Service Providers (ISP) requires this information

and if that is the case, they will provide you with the

name.

Domain Name

For example: yourcompany.com. The maximum input

for this field is 32 alphanumeric characters and it is case

insensitive. Note: 1. Your ISP may ask you to input a

certain domain name. 2. Domain name is also required

for internal network’s email and news functions.

DNS Configuration

This field is grayed out for the IP address is obtained

dynamically

DNS Server

Select Dynamic or Static. Enter the information of

Primary and Secondary DNS Server provided by your

ISP when Static configuration is selected.

Undo Click Undo to clear all the settings on this page.

Save After completing the settings on this page, click Save to

save the settings.

PPPoE (DSL dynamic Mode)

If this mode is selected and settings are saved, this Router will be connected to the

Internet over an always-on connection by a method provided by PPPoE.

PPPoE offers simulated dial-up, which save users’ time and effort to run the program on

their PCs. And the auto-connect/disconnect feature lets the system to stay idle when

there’s no activity, but pick up the connection in no time when there’s network activity.

This can significantly save users’ cost on connection fees.

The MTU function lets you choose the maximum packet size that fits your need for

optimal throughput. To reduce the packet size can help connecting to certain web sites or

speeding up packet to be received/sent.