User Manual

13
Password
Maximum input is 36 alphanumeric characters (case
sensitive)
Confirm Password
Re-enter your password for confirmation.
Service Name
For identification purpose. If it is required, your ISP will
provide you with the information.
MAX PACKET SIZE
(MTU)
Max packet size (MTU): Click the down arrow 6 to select
the most appropriate MSS (maximum segment size;
default value is 1492) for your application. Reducing the
packet size can help connecting to certain web sites or
speeding up packet transfer rate. If the incorrect selection
is selected, you may not be able to open certain web sites.
Static IP Address:
Enter the IP address provided by your ISP.
Static DNS Server
Enter the primary and secondary DNS addresses provided
by your ISP.
Auto-disconnect if
idle for minutes
Configure this device to disconnect the PPPoE connection
when there is no activity for a predetermined period of
time.
• Default: 5 minutes. You can input any number from 0
to 65535.
• To keep the line always connected, set the number to
0.
Auto-reconnect
Check to enable auto-reconnected with PPPoE line. This
function allows the device to automatically reconnect
when the line is disconnected due to ISP problem.
Save After completing the settings on this page, click Save to
save the settings.
Undo Click Undo to clear all the settings on this page.
Static Configuration
For leased line users, information provided by their ISPs has to be filled in the below
respective fields when this mode is selected. Information from your ISP includes: IP
address, Subnet Mask, Gateway, primary DNS, secondary DNS, note that there may be
more than one IP address from your ISP, select one address and enter it in the corre-
sponding field.