User Manual

17
Advanced Setup
Management
Figure 15
Change Administrator’s password: change the password for the device.
New Password Enter the new password.
Confirm New
Password
Re-enter the new password for confirmation.
Limit Management
Click to enable this function.
Enables two stations to manage this IP Share through Web configuration. Enter the
MAC addresses of the stations you selected for management. After the setup is
completed, only the assigned stations with correct password authentication can manage
this IP Share device.
Section 1 MAC
Address
Enter the first management station’s network adapter
MAC addresss.
Section 2 MAC
Address
Enter the second management station’s network adapter
MAC address. If you are only setting up one management
station, leave Station 2 MAC address with all F.
Block Internet
Request
Click to enable this function.
Blocks requests from Internet to the local network. If this
item is checked, the function of management through Web
configuration will be disabled. In other words, Internet
requests and the HTTP management, namely ICMP,
IDENT, and HTTP will be rejected.