User Manual

19
Maximum 24 Server entries are allowed and each port number can only be assigned to
one IP address.
NOTE: Setting up Virtual Server is like opening the firewall, which exposes your
network to users on the Internet. Which means the IP Share’s NAT will no longer be
able to provide protection from hackers.
Figure 16
Add Vitural Server
Method
¤By Name
¤ By Port
You can select to set up a virtual server either by name or by port
number.
Application
(Port)
Select and click ▼ to scroll down. Select from the most popular
server applications for Virtual Server.
Port Type
Select the port type (TCP or UDP) for the port number that was
entered earlier.
Single/Range,
Port Number
For selecting a specific port or a range of ports which you want
the Internet users to be able to access. The valid port number
ranges from 0 to 65535.
Local Server
IP Address
Enter the Local Server’s IP address (for the specified port entered
above).
Undo
Click Undo to clear all the settings on this page.
Add
Each time you finished setting, click Add and the added servers
will appear on the Server List.