User Manual

Undo

Click to clear all the settings on this page.

Add

After completing the settings on this page, click “Add” to save

the settings.

DMZ List

Display all the DMZ hosts.

DELETE ALL

Click to delete all the DMZ host(s) on the list.

Delete

Click on the Index drop-down menu to select the desired host

number and then click Delete to delete only the selected host.

Packet Filters

In the Packet Filters setup screen, you can block specific internal users from accessing

the Internet and you can also disable specific Internet services.

You can set up the filters through the following two filters: Network Adapter Address

(MAC address) and IP Address. Each filter can be set to Filter (drop) or Forward

(pass) packets. You can input up to 24 filters in this device.

Figure 19

NETWORK ADAPTER ADDRESS FILTER

Filter according to local computer’s network adapter MAC address (also known as the

adapter card’s Physical Address).

¤ FILTER ¤ FORWARD

SELECT TO FILTER OR FORWARD FOR THE

FOLLOWING ADAPTER ADDRESSES.

ADAPTER ADDRESS

ENTER THE DESIRED ADAPTER ADDRESSES.

IP Address Filter

Filter with computer’s IP address.

Filter/Forward

Select to Filter or Forward for the following IP Ad-

dresses.

Single/Range

You can filter a single IP, or a range of the IP ad-

dresses.