User Manual

22
IP Range
Enter the Start and End IP addresses for a range of IP
addresses for filter/forward.
Direction
¤From Local IP
¤To Remote IP
Filtering IP address of a local computer; or filtering IP
address of a remote server (this remote server connects
to the device via Internet).
Figure 20
TCP/UDP Port Filter
Filter using the port number. You can set filter for a single port or a range of ports.
Filter/Forward Select to Filter or Forward for the following assigned
port(s).
Single/Range You can filter a single port, or a range of ports
Port Number The port number(s) for the filters.
Port Type •TCP •UDP: filter according to the Connection-
Based Application Service on the remote server
using the port number.
Add Each time you finished setting the filters, click the Add button and
the added filter will appear on the Filter List
Undo Click Undo to clear all the settings in this categrory
Filter List
Display all the Packet Filters.
Delete All
Click to delete all the filters on the list.
Delete
Click on the Index drop-down menu to select the desired filter
number and then click Delete to delete only the selected filter.
Static Route
You can set static routes to manually administrate the network topology/traffic when the
dynamic route is not effective enough.