User Manual

23
To set static routers, select “Static Route #1” or “Static Route #2”, enter the settings.
You can refer to the following two example applications for settings. When finished,
click “Save” to save settings. Click “Undo” to clear all entries.
Static Route #
Destination Network
Host
The network address of the remote LAN Segment.
Network Mask
The network mask for the remote LAN Segment.
Gateway
The IP address of the gateway which this router must use to
communicate with the destination above.
Figure 21
Dynamic DNS
The Dynamic DNS (require Dynamic DNS Service) enables you to alias a dynamic IP
address to a static hostname, this allows your device to be more easily accessed by
specific name. When this function is enabled, the IP address in Dynamic DNS Server
will be automatically updated with the new IP address provided by ISP.