User's Manual

here.

Primary DNS Server: Enter the DNS server IP address(es) that provided by

your ISP, or you can specify your own preferred DNS server IP address(es).

Secondary DNS Server: Secondary DNS Server is optional. You can enter

another DNS server’s IP address as a backup.

PPPoE (ADSL)

If the PPPoE (ADSL) be selected, user have to set up the user name and

password according to the ISP that provided the related information.

User Name: Enter the username that provide by your ISP provider.

Maximum input is 32 alphanumeric characters (case sensitive).

Password: Enter the password that provide by your ISP provider. Maximum

input is 32 alphanumeric characters (case-sensitive).

Verify Password: Enter the password again to confirm.

Operation Mode: Select Keep Alive, On Demand or Manual form the pull-

down list.

z Keep Alive Mode: Enter the Redial Period seconds in the box.

z On demand Mode: Enter the Idle Time minutes in the box.

z MTU Value: MTU (Maximum Transmission Unit, namely the

maximum packet size, the default value is 1452) for your application.

Reducing the packet size can help connecting to certain web sites or

speeding up packet transfer rate. If the incorrect selection is entered,

you may not be able to open certain web sites.

Auth Mode: Select the authentication mode form the pull-down list.

3G (DIAL)

User have to insert USB card therefore, the 3G(DIAL) function can be used.

Provider: Select the ISP that provide the USB card from the pull-down list.

Service Name: Enter the service name that the ISP provided.

Dial Number: Enter the dial number that the ISP provided.