User's Manual

MAC Clone

Your ISP may require a particular MAC address in order for you to connect to

the Internet. This MAC address is the PC’s MAC address that your ISP had

originally connected your Internet connection to. Type in or click Fill my

MAC to replace the WAN MAC address with the MAC address of that PC.

Default setting is Disable. User can select Enable form the pull-down list,

and click Fill my MAC button to fill in your PC’s MAC address in the blank

field.

Apply

After completing the settings on this page, click Apply button to save the

settings.

Cancel

Click Cancel to restore to default values.

DHCP Clients

Here shows the IP assigned clients that computer in the network requests IP addresses from DHCP

server (Wireless Router).

Advanced Routing

If you connect several routers with this Wireless Router, you may need to set up a predefined routing

rule to have more effective network topology/traffic, this is called static route between those routers

and the Wireless Router.

To set static routers, enter the settings including route IP address, route mask route gateway the

route Interface from LAN or WAN.