User's Manual

Setup Wizard

Step 1- WAN Connect Detection

This page is used to detect the WAN connection of network. User can select Auto Detect form the

pull-down menu and click Start Auto Detect button, the system will detect whether there is WAN

connection or not. If user wants to set up the WAN detection manually, please select Manual form the

pull-down menu, then click Next to continue.

Select

To use the WAN detect function, user can select Manual or Auto

Detect form the pull-down menu.

WAN Detection

Select Auto Detect form the pull-down menu and click Start Auto

Detect button, the detecting screen will be pop-up to detect whether

there is WAN connection or not. If user wants to set up the WAN

detection manually, please select Manual form the pull-down menu,

then click Next to continue.

Detect Result

Here shows the WAN detection result. If there is no WAN connection,

the system will show NONE or Unplugged Cable.

Step 2- WAN Access Type

Here user can set up the WAN connection type easily. Select the WAN Connection Type Static (Fixed

IP), DHCP (Auto Config), PPPoE (ADSL), or 3G (DIAL) and click Next to continue.

WAN Access

Type

Static (Fixed IP)