User's Manual

Dial Number: Enter the dial number that the ISP provided.

Operation Mode: Select Keep Alive, On Demand or Manual form the pull-

down list.

z Keep Alive Mode: Enter the Redial Period seconds in the box.

z On demand Mode: Enter the Idle Time minutes in the box.

z MTU Value: MTU (Maximum Transmission Unit, namely the maximum

packet size, the default value is 1452) for your application. Reducing the

packet size can help connecting to certain web sites or speeding up packet

transfer rate. If the incorrect selection is entered, you may not be able to

open certain web sites.

Step 3- LAN

This step can set up local area network of the Wireless Router, such as IP address, subnet mask, DHCP

type, DHCP IP addresses range, DHCP subnet mask and DHCP lease time.

IP Address

Shows the IP address of the Wireless Router (Default IP address is

192.168.1.1.)

Subnet Mask

The subnet mask of the Wireless Router (Default subnet mask is

255.255.255.0.)

DHCP Type

Disable: Select to disable this Wireless Router to distribute IP

addresses to connected clients.

Server: Select to enable this Wireless Router to distribute IP Addresses

(DHCP Server) to connected clients. And the following field will be

activated for you to enter the starting IP Address.

Start IP Address

The starting address of this local IP network address pool. The pool is a

piece of continuous IP address segment. Keep the default value