User's Manual

Service Name: Enter the service name that ISP provided.

Dial Number: Enter the dial number that ISP provided.

Pin code: Enter the SIM card Pin code that ISP provided.

Authentication: Check the box to enable to authentication function.

z User Name: Enter the user name that provide by your ISP.

z Password: Enter the password that provide by your ISP.

z Auth Mode: Select the authentication mode form the pull-down list.

Operation Mode: Select Keep Alive, On Demand or Manual form the pull-

down list.

z Keep Alive Mode: Enter the Redial Period seconds in the box.

z On demand Mode: Enter the Idle Time minutes in the box.

z MTU Value: MTU (Maximum Transmission Unit, namely the

maximum packet size, the default value is 1452) for your application.

Reducing the packet size can help connecting to certain web sites or

speeding up packet transfer rate. If the incorrect selection is entered,

you may not be able to open certain web sites.

MAC Clone

Your ISP may require a particular MAC address in order for you to connect to

the Internet. This MAC address is the PC’s MAC address that your ISP had

originally connected your Internet connection to. Type in or click Fill my

MAC to replace the WAN MAC address with the MAC address of that PC.

Default setting is Disable. User can select Enable form the pull-down list,

and click Fill my MAC button to fill in your PC’s MAC address in the blank

field.

Apply

After completing the settings on this page, click Apply button to save the

settings.

Cancel

Click Cancel to restore to default values.

DHCP Clients

Here shows the IP assigned clients that computer in the network requests IP addresses from DHCP

server (Wireless Router).